Boost C++ Libraries

...one of the most highly regarded and expertly designed C++ library projects in the world. Herb Sutter and Andrei Alexandrescu, C++ Coding Standards

This is the documentation for an old version of Boost. Click here to view this page for the latest version.
PrevUpHomeNext

Extended functionality: Configurable containers

Configurable tree-based associative ordered containers
Configurable vector
Configurable static vector
Configurable small vector
Configurable deques
Configurable devector

Boost.Container offers the possibility to configure at compile time some parameters of several containers, apart from the stored type and the allocator. This configuration is passed as the last template parameter and defined using the utility classes. The following containers can receive useful configuration options:

set, multiset, map and multimap associative containers are implemented as binary search trees which offer the needed complexity and stability guarantees required by the C++ standard for associative containers.

Boost.Container offers the possibility to configure at compile time some parameters of the binary search tree implementation. This configuration is passed as the last template parameter and defined using the utility class tree_assoc_options. The following parameters can be configured:

  • The underlying tree implementation type (tree_type). By default these containers use a red-black tree but the user can use other tree types:
  • Whether the size saving mechanisms are used to implement the tree nodes (optimize_size). By default this option is activated and is only meaningful to red-black and avl trees (in other cases, this option will be ignored). This option will try to put rebalancing metadata inside the "parent" pointer of the node if the pointer type has enough alignment. Usually, due to alignment issues, the metadata uses the size of a pointer yielding to four pointer size overhead per node, whereas activating this option usually leads to 3 pointer size overhead. Although some mask operations must be performed to extract data from this special "parent" pointer, in several systems this option also improves performance due to the improved cache usage produced by the node size reduction.

See the following example to see how tree_assoc_options can be used to customize these containers:

#include <boost/container/set.hpp>

//Make sure assertions are active
#ifdef NDEBUG
#undef NDEBUG
#endif
#include <cassert>

int main ()
{
   using namespace boost::container;

   //First define several options
   //

   //This option specifies an AVL tree based associative container
   typedef tree_assoc_options< tree_type<avl_tree> >::type AVLTree;

   //This option specifies an AVL tree based associative container
   //disabling node size optimization.
   typedef tree_assoc_options< tree_type<avl_tree>
                             , optimize_size<false> >::type AVLTreeNoSizeOpt;

   //This option specifies an Splay tree based associative container
   typedef tree_assoc_options< tree_type<splay_tree> >::type SplayTree;

   //Now define new tree-based associative containers
   //

   //AVLTree based set container
   typedef set<int, std::less<int>, new_allocator<int>, AVLTree> AvlSet;

   //AVLTree based set container without size optimization
   typedef set<int, std::less<int>, new_allocator<int>, AVLTreeNoSizeOpt> AvlSetNoSizeOpt;

   //Splay tree based multiset container
   typedef multiset<int, std::less<int>, new_allocator<int>, SplayTree> SplayMultiset;

   //Use them
   //
   AvlSet avl_set;
   avl_set.insert(0);
   assert(avl_set.find(0) != avl_set.end());

   AvlSetNoSizeOpt avl_set_no_szopt;
   avl_set_no_szopt.insert(1);
   avl_set_no_szopt.insert(1);
   assert(avl_set_no_szopt.count(1) == 1);

   SplayMultiset splay_mset;
   splay_mset.insert(2);
   splay_mset.insert(2);
   assert(splay_mset.count(2) == 2);
   return 0;
}

The configuration for vector is passed as the last template parameter and defined using the utility class vector_options. The following parameters can be configured:

  • growth_factor: the growth policy of the vector. The rate at which the capacity of a vector grows is implementation dependent and implementations choose exponential growth in order to meet the amortized constant time requirement for push_back. A higher growth factor will make it faster as it will require less data movement, but it will have a greater memory impact (on average, more memory will be unused). A user can provide a custom implementation of the growth factor and some predefined policies are available: growth_factor_50, growth_factor_60 (usually the default) and growth_factor_100.
  • stored_size: the type that will be used to store size-related parameters inside of the vector. Sometimes, when the maximum capacity to be used is much less than the theoretical maximum that a vector can hold, it's interesting to use smaller unsigned integer types to represent size() and capacity() inside vector, so that the size of an empty vector is minimized and cache performance might be improved. See stored_size for more details.

See the following example to see how vector_options can be used to customize vector:

#include <boost/container/vector.hpp>
#include <boost/static_assert.hpp>

//Make sure assertions are active
#ifdef NDEBUG
#undef NDEBUG
#endif
#include <cassert>

int main ()
{
   using namespace boost::container;

   //This option specifies that a vector that will use "unsigned char" as
   //the type to store capacity or size internally.
   typedef vector_options< stored_size<unsigned char> >::type size_option_t;

   //Size-optimized vector is smaller than the default one.
   typedef vector<int, new_allocator<int>, size_option_t > size_optimized_vector_t;
   BOOST_STATIC_ASSERT(( sizeof(size_optimized_vector_t) < sizeof(vector<int>) ));

   //Requesting capacity for more elements than representable by "unsigned char"
   //is an error in the size optimized vector.
   bool exception_thrown = false;

   try       { size_optimized_vector_t v(256); }
   catch(...){ exception_thrown = true;        }

   assert(exception_thrown == true);

   //This option specifies that a vector will increase its capacity 50%
   //each time the previous capacity was exhausted.
   typedef vector_options< growth_factor<growth_factor_50> >::type growth_50_option_t;

   //Fill the vector until full capacity is reached
   vector<int, new_allocator<int>, growth_50_option_t > growth_50_vector(5, 0);
   const std::size_t old_cap = growth_50_vector.capacity();
   growth_50_vector.resize(old_cap);

   //Now insert an additional item and check the new buffer is 50% bigger
   growth_50_vector.push_back(1);
   assert(growth_50_vector.capacity() == old_cap*3/2);

   return 0;
}

The configuration for static_vector is passed as the last template parameter and defined using the utility class static_vector_options. The following parameters can be configured:

  • inplace_alignment: the minimum alignment (in bytes) that the stored value type needs. This option allows static vectors that need non-default alignments, e.g., to be used in SIMD operations.
  • throw_on_overflow: A boolean that specifies if the container should throw an exception when the compile-time capacity is not enough to hold the requesteed number of objects. When "false", if the capacit is overflowed, the implementation calls to BOOST_ASSERT and if that assertion does not throw or abort, undefined behavior is triggered.

See the following example to see how static_vector_options can be used to customize static_vector:

#include <boost/container/static_vector.hpp>
#include <boost/static_assert.hpp>

//Make sure assertions are active
#ifdef NDEBUG
#undef NDEBUG
#endif
#include <cassert>

int main ()
{
   using namespace boost::container;

   //This option specifies the desired alignment for value_type
   typedef static_vector_options< inplace_alignment<16u> >::type alignment_16_option_t;

   //Check 16 byte alignment option
   static_vector<int, 10, alignment_16_option_t > sv;
   assert(((std::size_t)sv.data() % 16u) == 0);

   //This static_vector won't throw on overflow, for maximum performance
   typedef static_vector_options< throw_on_overflow<false> >::type no_throw_options_t;

   //Create static_vector with no throw on overflow
   static_vector<int, 10, no_throw_options_t > sv2;

   return 0;
}

The configuration for small_vector is passed as the last template parameter and defined using the utility class small_vector_options. The following parameters can be configured:

  • inplace_alignment: the minimum alignment (in bytes) for the in-place storage used to build the "small" number of elements. The alignment of the dynamic memory must be provided by the allocator and it is not affected by this option.
  • growth_factor: the growth policy of the vector. The rate at which the capacity of a vector grows is implementation dependent and implementations choose exponential growth in order to meet the amortized constant time requirement for push_back. A higher growth factor will make it faster as it will require less data movement, but it will have a greater memory impact (on average, more memory will be unused). A user can provide a custom implementation of the growth factor and some predefined policies are available: growth_factor_50, growth_factor_60 and growth_factor_100.

See the following example to see how small_vector_options can be used to customize small_vector:

#include <boost/container/small_vector.hpp>
#include <boost/static_assert.hpp>

//Make sure assertions are active
#ifdef NDEBUG
#undef NDEBUG
#endif
#include <cassert>

int main ()
{
   using namespace boost::container;

   //This option specifies the desired alignment for the internal value_type
   typedef small_vector_options< inplace_alignment<16u> >::type alignment_16_option_t;

   //Check 16 byte alignment option
   small_vector<int, 10, void, alignment_16_option_t > sv;
   assert(((std::size_t)sv.data() % 16u) == 0);


   //This option specifies that a vector will increase its capacity 50%
   //each time the previous capacity was exhausted.
   typedef small_vector_options< growth_factor<growth_factor_50> >::type growth_50_option_t;

   //Fill the vector until full capacity is reached
   small_vector<int, 10, void, growth_50_option_t > growth_50_vector(10, 0);
   const std::size_t old_cap = growth_50_vector.capacity();
   growth_50_vector.resize(old_cap);

   //Now insert an additional item and check the new buffer is 50% bigger
   growth_50_vector.push_back(1);
   assert(growth_50_vector.capacity() == old_cap*3/2);

   return 0;
}

The configuration for deque is passed as the last template parameter and defined using the utility class deque_options. The following parameters can be configured:

Parameters that control the size of deque's 'block' (deque allocates contiguous chunks of elements, called 'blocks'). Only one of these paratemers can be specified:

  • block_bytes: the number of bytes deque will allocate for store elements contiguously: deque::get_block_size() will return aproximately block_bytes/sizeof(value_type). A value of zero means the default value.
  • block_size: the number of elements deque will allocate contiguously. If this option is specified, deque::get_block_size() will return the specified block_size. A value of zero means the default value.

See the following example to see how deque_options can be used to customize deque:

#include <boost/container/deque.hpp>
#include <boost/static_assert.hpp>

//Make sure assertions are active
#ifdef NDEBUG
#undef NDEBUG
#endif
#include <cassert>

int main ()
{
   using namespace boost::container;

   //This option specifies the desired block size for deque
   typedef deque_options< block_size<128u> >::type block_128_option_t;

   //This deque will allocate blocks of 128 elements
   typedef deque<int, void, block_128_option_t > block_128_deque_t;
   assert(block_128_deque_t::get_block_size() == 128u);

   //This option specifies the maximum block size for deque
   //in bytes
   typedef deque_options< block_bytes<1024u> >::type block_1024_bytes_option_t;

   //This deque will allocate blocks of 1024 bytes
   typedef deque<int, void, block_1024_bytes_option_t > block_1024_bytes_deque_t;
   assert(block_1024_bytes_deque_t::get_block_size() == 1024u/sizeof(int));

   return 0;
}

The configuration for devector is passed as the last template parameter and defined using the utility class devector_options. The following parameters can be configured:

  • growth_factor: the growth policy of the devector. The rate at which the capacity of a devector grows is implementation dependent and implementations choose exponential growth in order to meet the amortized constant time requirement for push_back. A higher growth factor will make it faster as it will require less data movement, but it will have a greater memory impact (on average, more memory will be unused). A user can provide a custom implementation of the growth factor and some predefined policies are available: growth_factor_50, growth_factor_60 (usually the default) and growth_factor_100.
  • stored_size: the type that will be used to store size-related parameters inside of the devector. Sometimes, when the maximum capacity to be used is much less than the theoretical maximum that a devector can hold, it's interesting to use smaller unsigned integer types to represent size() and capacity() inside devector, so that the size of an empty devector is minimized and cache performance might be improved. See stored_size for more details.
  • relocate_on_XX: load factor limit that will determine if new memory should be allocated or elements should relocated inside existing memory, when the free space is exhausted at one end of the container.

See the following example to see how devector_options can be used to customize devector:

#include <boost/container/devector.hpp>
#include <boost/static_assert.hpp>

//Make sure assertions are active
#ifdef NDEBUG
#undef NDEBUG
#endif
#include <cassert>

int main ()
{
   using namespace boost::container;

   ////////////////////////////////////////////////
   //          'stored_size' option
   ////////////////////////////////////////////////
   //Specify that a devector will use "unsigned char" as the type to store size/capacity
   typedef devector_options< stored_size<unsigned char> >::type size_option_t;

   //Size-optimized devector is smaller than the default one.
   typedef devector<int, new_allocator<int>, size_option_t > size_optimized_devector_t;
   BOOST_STATIC_ASSERT(( sizeof(size_optimized_devector_t) < sizeof(devector<int>) ));

   //Requesting capacity for more elements than representable by "unsigned char" is an error
   bool exception_thrown = false;

   try       { size_optimized_devector_t v(256); }
   catch(...){ exception_thrown = true;        }
   assert(exception_thrown == true);

   ////////////////////////////////////////////////
   //          'growth_factor' option
   ////////////////////////////////////////////////
   //Specify that a devector will increase its capacity 50% when reallocating
   typedef devector_options< growth_factor<growth_factor_50> >::type growth_50_option_t;

   //Fill the devector until full capacity is reached
   devector<int, new_allocator<int>, growth_50_option_t > growth_50_dv(5, 0);
   std::size_t old_cap = growth_50_dv.capacity();
   growth_50_dv.resize(old_cap);

   //Now insert an additional item and check the new buffer is 50% bigger
   growth_50_dv.push_back(1);
   assert(growth_50_dv.capacity() == old_cap*3/2);

   ////////////////////////////////////////////////
   //          'relocate_on' option
   ////////////////////////////////////////////////

   //Specifies that a devector will not reallocate but relocate elements if the free space
   //at one end is exhausted and the total load factor is below the 66% threshold.
   typedef devector_options< relocate_on_66 >::type relocation_66_option_t;

   //Configure devector to have equal free space at both ends
   devector<int, new_allocator<int>, relocation_66_option_t > reloc_66_dv
      (16u, 16u, reserve_only_tag_t());
   old_cap = reloc_66_dv.capacity();
   const std::size_t front_free_cap = reloc_66_dv.front_free_capacity();

   //Fill vector at the back end
   while (reloc_66_dv.back_free_capacity() > 0)
      reloc_66_dv.push_back(0);

   //Front free capacity is intact
   assert(reloc_66_dv.front_free_capacity() == front_free_cap);

   //Now insert new element, values should relocated to the middle as the
   //load factor is near 50%
   reloc_66_dv.push_back(0);
   assert(reloc_66_dv.capacity() == old_cap);
   assert(reloc_66_dv.front_free_capacity() < front_free_cap);

   //Fill the back end again
   while (reloc_66_dv.back_free_capacity() > 0)
      reloc_66_dv.push_back(1);

   //New insertion should reallocate as load factor is higher than 66%
   reloc_66_dv.push_back(-1);
   assert(reloc_66_dv.capacity() > old_cap);

   return 0;
}


PrevUpHomeNext